Oil-Immersed Distribution Transformer

11 kV Oil-Immersed Distribution Transformer

A sealed or conservator-type distribution transformer for common 11 kV networks with project-specific efficiency and accessories.

Rated voltage: Up to 12 kV class
Capacity range: 50–5000 kVA
Standards basis: IEC 60076 series; local efficiency rules where applicable
Typical application: utility distribut…

Request a quote → View technical data ↓

Technical product selection

Typical Use

Where this product is used

utility distribution, commercial facilities and industrial feeders

Technical Data

Typical technical parameters

The published values define the normal selection range. Final ratings and interfaces are confirmed against the approved single-line diagram and destination requirements.

Design standardIEC 60076 series; local efficiency rules where applicable

ConfigurationInternational distribution networks

Applicable standards

IEC 60076 series; local efficiency rules where applicable

Rated voltage

Up to 12 kV class

Rated capacity

50–5000 kVA

System frequency

50 Hz or 60 Hz, as specified

Construction

Hermetically sealed or conservator type

Vector group

Dyn11 or project-specific

Tapping

Off-circuit or on-load regulation according to the network requirement

Application

utility distribution, commercial facilities and industrial feeders

Ambient and altitude

Confirmed from site conditions

Testing and inspection

Routine tests plus agreed type, special and third-party inspection requirements

Documentation

Drawings, data sheets, test reports, manuals and packing documents

These values are for product selection. Final guaranteed values are confirmed in the approved technical agreement.

Configuration

Details to confirm before production

Confirm these items so the quotation and product design match your project.

Distribution duty

Confirm kVA demand, diversity, overload profile, primary system and secondary utilization voltage.

Tank construction

Choose hermetically sealed corrugated tank or conservator construction according to rating, maintenance policy and local practice.

Efficiency requirement

State the applicable national efficiency regulation or the guaranteed no-load and load-loss evaluation basis.

Outdoor environment

Define altitude, temperature, humidity, pollution, coastal corrosion and mounting arrangement.

Normal supply

Typical standard equipment

Sealed tank or conservator system as selected
Off-circuit tap switch
HV and LV bushings or cable boxes
Pressure relief and oil filling/drain provisions
Nameplate, earthing terminals and lifting lugs

Project options

Common optional equipment

On-load voltage regulation
Plug-in cable connectors
Winding temperature controller
Natural ester fluid
Cable boxes and terminal enclosures
Skid base, rollers or anti-vibration supports

Testing and Documents

Tests and documents supplied with the product

The required tests and documents are confirmed before the order is placed.

Routine verification

Tests required for each completed unit under the selected product standard.

Design and type evidence

Applicable type-test evidence or agreed design verification is reviewed during technical approval.

Special testing

Sound, temperature-rise, impulse, partial-discharge or other special tests are included only when specified.

Document package

Approved drawings, data sheets, test reports, manuals, packing list and agreed quality records.

A sealed or conservator-type distribution transformer for common 11 kV networks with project-specific efficiency and accessories.

Product overview

11 kV Oil-Immersed Distribution Transformer is configured for utility distribution, commercial facilities and industrial feeders. Apex coordinates technical review, qualified production, documentation and export delivery according to the approved project requirements.

Applications

utility distribution, commercial facilities and industrial feeders. Final design considers the system study, load profile, fault level, installation environment, efficiency targets and local grid requirements.

Quotation Information

What to include with your inquiry

Send the information you already have. Unknown items can be confirmed during technical review.

Rated power (kVA)
Primary and secondary voltages
Single-phase or three-phase
Frequency and applicable standard
Efficiency or loss requirements
Sealed tank or conservator design
Required accessories
Quantity
Destination country and delivery location

FAQ

Questions buyers usually ask

Sealed tank or conservator type: which should be used?

Sealed corrugated tanks reduce routine oil handling for common distribution duties. Conservator arrangements remain appropriate where the rating, utility practice or accessory package requires an expansion system.

Which standard should be stated in the RFQ?

Use the project or utility standard stated in the specification. Where it is not defined, send the destination, system voltage and application so the appropriate IEC or ANSI/IEEE basis can be proposed.

Are guaranteed values the same as the website values?

No. Website values are selection guidance. Guaranteed performance is stated in the approved technical data sheet and commercial offer.

What information helps Apex respond faster?

A single-line diagram, load data, voltage ratio, capacity, quantity, installation conditions, destination and required delivery date provide the best starting point.

Applications

Choose equipment for the site and operating conditions.

View Applications →

Technical Articles

Product selection and application guides.

View Technical Articles →

TECHNICAL ARTICLE

Ready to request a quotation?

Send the product details and attach a specification or single-line diagram when available.

Send Your Requirements →

11 kV Oil-Immersed Distribution Transformer

Where this product is used

Typical technical parameters

Details to confirm before production

Distribution duty

Tank construction

Efficiency requirement

Outdoor environment

Typical standard equipment

Common optional equipment

Tests and documents supplied with the product

Routine verification

Design and type evidence

Special testing

Document package

Product overview

Applications

What to include with your inquiry

Questions buyers usually ask

Choose equipment for the site and operating conditions.

Product selection and application guides.

The Minimum Data Needed for a Reliable Transformer RFQ

Transformer Tests and Documentation Buyers Should Request

Compact Substation Layout: Design Before Packaging

Ready to request a quotation?

Where this product is used

Typical technical parameters

Details to confirm before production

Distribution duty

Tank construction

Efficiency requirement

Outdoor environment

Typical standard equipment

Common optional equipment

Tests and documents supplied with the product

Routine verification

Design and type evidence

Special testing

Document package

Product overview

Applications

What to include with your inquiry

Questions buyers usually ask

Compare within this product family.

20/24 kV Oil-Immersed Distribution Transformer

33/35 kV Oil-Immersed Distribution Transformer

Choose equipment for the site and operating conditions.

Product selection and application guides.

The Minimum Data Needed for a Reliable Transformer RFQ

Transformer Tests and Documentation Buyers Should Request

Compact Substation Layout: Design Before Packaging

Ready to request a quotation?